NIMONIC alloys are primarily composed of nickel and chromium. These alloys are known for their high-temperature low-creep and high performance. Additives like aluminium, carbon and titanium are infused into the alloy. The NIMONIC alloy was first developed in 1940 in England. NIMONIC alloys available commercially are NIMONIC 75, NIMONIC 80A, 81, 86, NIMONIC PE11 and 16.
NIMONIC alloy 80A is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. It is manufactured by high-frequency melting and casting in air. It is similar to NIMONIC alloy 75. It has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F). This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 80A.
Welding NIMONIC alloy 80A can be welded using common techniques, using a matching filler metal. A prerequisite for welding is that the metal should be solution treated. Fusion welding by tungsten inert gas welding and metal inert gas welding will be suitable for this alloy.
Hot working NIMONIC alloy 80A can be hot worked at temperature ranges of 1050-1200°C (1920-2190°F).
Applications The NIMONIC alloy 80A is used in the following applications:
Gas turbine engineering
Automobile exhaust valves
Die-casting inserts and cores
Nuclear boiler tube parts.
Nimonic Availability Alloy Steel Age supplies Nimonic in the form of Angle, Sheets, Plates, Flanges, Flat Bars, Pipe Fittings, Pipes, Chnnels and flanges.
Grades :
Alloy 105, Alloy 115, Alloy 263 ( UNS N07263 ), Alloy 75 ( UNS N06075 ), Alloy 80A ( UNS N07080 ),Alloy 81, Alloy 86, Alloy 90 ( UNS N07090 ), Alloy 901 ( UNS N09901 ), Alloy PE11, Alloy PE16, Alloy PK33, NIMONIC MP35N
Thickness :
0.9mm - 7mm
Size :
0.5mm*40mm*40mm-20mm*400mm*400mm
Length :
3MTR, 4MTR, 5MTR, 6MTR / Coating 6.5 meters, Anodizing 6.5 meters, Mill finish 5 meters
Finish :
Mill, Customer specific finish
Surface :
Anodize, powder coating, electrophoresis, PVDF coating, wood grain painting, matted, etc
Grades :
Alloy 105, Alloy 115, Alloy 263 ( UNS N07263 ), Alloy 75 ( UNS N06075 ), Alloy 80A ( UNS N07080 ),Alloy 81, Alloy 86, Alloy 90 ( UNS N07090 ), Alloy 901 ( UNS N09901 ), Alloy PE11, Alloy PE16, Alloy PK33, NIMONIC MP35N
Thickness :
0.2~300mm
Width :
500~2500mm
Length :
500~10000mm
Surface :
Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc.
Aluminum Sheet/ Plate Coating :
PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating
Type :
Hot-Rolled (HR) / Cold-Rolled (CR) Sheet / Plates/ Strips/ Coils/ Chequered Plates
Grades :
Alloy 105, Alloy 115, Alloy 263 ( UNS N07263 ), Alloy 75 ( UNS N06075 ), Alloy 80A ( UNS N07080 ),Alloy 81, Alloy 86, Alloy 90 ( UNS N07090 ), Alloy 901 ( UNS N09901 ), Alloy PE11, Alloy PE16, Alloy PK33, NIMONIC MP35N
Thickness :
0.2~300mm
Width :
500~2500mm
Length :
500~10000mm
Surface :
Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc.
Aluminum Sheet/ Plate Coating :
PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating
Type :
Hot-Rolled (HR) / Cold-Rolled (CR) Sheet / Plates/ Strips/ Coils/ Chequered Plates
Grades :
Alloy 105, Alloy 115, Alloy 263 ( UNS N07263 ), Alloy 75 ( UNS N06075 ), Alloy 80A ( UNS N07080 ),Alloy 81, Alloy 86, Alloy 90 ( UNS N07090 ), Alloy 901 ( UNS N09901 ), Alloy PE11, Alloy PE16, Alloy PK33, NIMONIC MP35N
Dimensions:
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Size :
1/2" (15 NB) to 48" (1200NB)
Class :
150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
DIN :
DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
BS :
BS4504 , BS4504, BS1560, BS10
Flange Face Type :
Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Form :
Slip on flanges, Socket weld flanges, Forged flanges, Blind flanges, Welding neck flange, Ring type joint flange, Spectacle blind flange, Reducing flange, Threaded / Screwed flange, Tongue and Groove flange, Long weld neck flange, Plate flange, ASME B16.5 flange
Grades :
Alloy 105, Alloy 115, Alloy 263 ( UNS N07263 ), Alloy 75 ( UNS N06075 ), Alloy 80A ( UNS N07080 ),Alloy 81, Alloy 86, Alloy 90 ( UNS N07090 ), Alloy 901 ( UNS N09901 ), Alloy PE11, Alloy PE16, Alloy PK33, NIMONIC MP35N
Standard :
ASTM, BS and all International Standards
Temper :
O, H12, H14, H16, H18, H22, H24, H26, H32, H112
Thickness
0.1-600mm, etc
Size:
1-2500mm, etc
Types
Nimonic Flat Bars, Nimonic Alloy Flat Bars
Grades :
Alloy 105, Alloy 115, Alloy 263 ( UNS N07263 ), Alloy 75 ( UNS N06075 ), Alloy 80A ( UNS N07080 ),Alloy 81, Alloy 86, Alloy 90 ( UNS N07090 ), Alloy 901 ( UNS N09901 ), Alloy PE11, Alloy PE16, Alloy PK33, NIMONIC MP35N
Bending Radius :
R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Dimensions :
ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size :
Seamless Elbow ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
Type :
Seamless / ERW / Welded / Fabricated
Thickness :
Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
Form :
Elbow, 45 / 90 / 180 Deg Elbow, Reducing Elbow, Long Radius Elbow, Short Radius Elbow, LR Elbow, SR Elbow
Grades :
Alloy 105, Alloy 115, Alloy 263 ( UNS N07263 ), Alloy 75 ( UNS N06075 ), Alloy 80A ( UNS N07080 ),Alloy 81, Alloy 86, Alloy 90 ( UNS N07090 ), Alloy 901 ( UNS N09901 ), Alloy PE11, Alloy PE16, Alloy PK33, NIMONIC MP35N
Standard :
AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
Size :
8 (1-1/2″ / 1.900″)
Outer Diameter :
1″ through 16″
Form :
Round, Square, Rectangular, Custom, Hollow, Extruded Pipe Etc
Length :
Double Random, Single Random, Cut Length
Types :
Seamless / ERW / Welded / Fabricated / LSAW Pipes
Thickness :
SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
End :
Plain End, Beveled End, Threaded
Grades :
Alloy 105, Alloy 115, Alloy 263 ( UNS N07263 ), Alloy 75 ( UNS N06075 ), Alloy 80A ( UNS N07080 ),Alloy 81, Alloy 86, Alloy 90 ( UNS N07090 ), Alloy 901 ( UNS N09901 ), Alloy PE11, Alloy PE16, Alloy PK33, NIMONIC MP35N
Dimensions :
EN, DIN, JIS, ASTM, BS, ASME, AISI
Nimonic Channels
40mm*20mm~300mm*300mm
Length
3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Types
Structural Steel U, C, Miscellaneous Channels, Hot Rolled Channel
Grades :
Alloy 105, Alloy 115, Alloy 263 ( UNS N07263 ), Alloy 75 ( UNS N06075 ), Alloy 80A ( UNS N07080 ),Alloy 81, Alloy 86, Alloy 90 ( UNS N07090 ), Alloy 901 ( UNS N09901 ), Alloy PE11, Alloy PE16, Alloy PK33, NIMONIC MP35N
Standard :
ASTM, ASME, AMS, GB/T, JIS
Nimonic Round Bar Temper :
O, H12, H14, H16, H18, H22, H24, H26, H32, H112
Nimonic Bar Form
Nimonic Round, Hex, Flat, Half Round, Oval, Rectangular in Black & Bright Finish
Nimonic Round Bar Diameter
0.1-600mm,etc
Nimonic Hexagonal Bar
0.1-600mm,etc
Nimonic Round Bar Length
1-12m, Random, Fix & Cut Length or as per clients’ requirement
Nimonic Bar :
Bright, Polish & Black
Types
Round, Square, Recatangle, Hexagonal, Round Threaded
Grades :
Alloy 105, Alloy 115, Alloy 263 ( UNS N07263 ), Alloy 75 ( UNS N06075 ), Alloy 80A ( UNS N07080 ),Alloy 81, Alloy 86, Alloy 90 ( UNS N07090 ), Alloy 901 ( UNS N09901 ), Alloy PE11, Alloy PE16, Alloy PK33, NIMONIC MP35N
Dimensions :
EN, DIN, JIS, ASTM, BS, ASME, AISI
Nimonic Beam
3″ thru 12.31″
Length
3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Types
T Beams, Hot Rolled T Beams