Stainless Steel
Stainless steel is a corrosion resistant steel alloy with a minimum of 10% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present. The chromium creates an invisible passive film of chromium oxide that will not let oxygen attack the surface and prevents rusting of the iron base.
Stainless steel, also known as Alloy Steel Age is defined as a steel alloy with a minimum of 10.5 or 11% chromium content by mass. Stainless steel does not stain, corrode, or rust as easily as ordinary steel.It is also called corrosion-resistant steel or CRES when the alloy type and grade are not detailed, particularly in the aviation industry.
Available forms are Stainless Steel Pipes & Tubes, Stainless Steel Round Bars, Stainless Steel Fasteners, Stainless Steel Sheet,Stainless Steel Plate,Stainless Steel Forged Fittings, Stainless Steel Valves, Stainless Steel pipe fittings,Stainless Steel flanges.
Specification
Stainless Steel Angles
Grades :
304, 304L, 304H, 308, 309, 309S, 310S, 310H, 312, 314, 316, 316L 316H, 316Ti, 317L, 321, 347, 347H,904L
Standard :
ASTM A276/ASME SA276 EN, BS, GB, DIN, JIS, etc
Size Range :
Width: (Coil) 900 - 3000 mm /(Strip) Min-15mm
Length(mm)
Max 6000
Thickness
3-10
Width
25-100
Types
Stuctural Steel Angle, Bars, Equal, Unequal, L, T, Hot Rolled
Stainless Steel Sheets
Grades :
304, 304L, 304H, 308, 309, 309S, 310S, 310H, 312, 314, 316, 316L 316H, 316Ti, 317L, 321, 347, 347H,904L
Standard :
ASTM A240 / ASME SA240
Width :
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness :
4mm-100mm
Length :
2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface Finish :
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc
Hardness :
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Form
Plain Sheet, Shim Sheet, Perforated Sheet
Stainless Steel Plates
Grades :
304, 304L, 304H, 308, 309, 309S, 310S, 310H, 312, 314, 316, 316L 316H, 316Ti, 317L, 321, 347, 347H,904L
Standard :
ASTM A240 / ASME SA240
Width :
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness :
4mm-100mm
Length :
2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface Finish :
2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc
Hardness :
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Form
Chequered Plate
Stainless Steel Flanges
Grades :
304, 304L, 304H, 308, 309, 309S, 310S, 310H, 312, 314, 316, 316L 316H, 316Ti, 317L, 321, 347, 347H,904L
Standard :
ASTM A182 / ASME SA182
Dimensions :
ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Standard :
ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size :
1/2" (15 NB) to 48" (1200NB)
Class/Pressure :
150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type :
Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Form :
Slip on flanges, Socket weld flanges, Forged flanges, Blind flanges, Welding neck flange, Ring type joint flange, Spectacle blind flange, Reducing flange, Threaded / Screwed flange, Tongue and Groove flange, Long weld neck flange, Plate flange, ASME B16.5 flange
Stainless Steel Flat Bars
Grades :
304, 304L, 304H, 308, (308)/F45, 309, 309S, 310S, 310H, 312, 314, 316, 316L 316H, 316Ti, 317L, 321, 347, 347H,904L
Standard :
ASTM A666 / ASME SA666
Size Range :
Width: 3.17mm to 350mm dia
Length(mm)
2 meters - 7 meters ( 8 feet to 24 feet)
Thickness
2mm~100mm
Width
25-100
Types
SS Flat Bars, Steel Flat Bars
Stainless Steel Pipe Fittings
Grades :
304, 304L, 304H, 308, 309, 309S, 310S, 310H, 312, 314, 316, 316L 316H, 316Ti, 317L, 321, 347, 347H,904L
Standard :
ASTM A403 / ASME SA403
Dimensions :
ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size :
1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Type :
Seamless / Welded / Fabricated
Bending Radius :
R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Schedule :
Sch 5 TO Sch XXS.
Thickness :
Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Stainless Steel Pipes
Grades :
304, 304L, 304H, 308, 309, 309S, 310S, 310H, 312, 314, 316, 316L 316H, 316Ti, 317L, 321, 347, 347H,904L
Standard :
ASTM A/ASME SA213, A249, A269, A312, A358
Seamless Size :
1/2″ NB – 16″ NB
ERW Size :
1/2″ NB – 24″ NB
EFW Size :
6″ NB – 100″ NB
Outside Diameter :
6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available
Length :
Single Random, Double Random & Required Length
Thickness :
0.3mm – 50 mm
Schedule :
SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXS
Type :
Seamless, Welded, ERW, EFW
Form :
Round Pipes, Square Pipes, Rectangular Pipe
End :
Plain End, Beveled End, Treaded
Stainless Steel Channels
Grades :
304, 304L, 304H, 308, 309, 309S, 310S, 310H, 312, 314, 316, 316L 316H, 316Ti, 317L, 321, 347, 347H,904L
Standard :
ASTM A276, A473, A479, A484, A582
Size Range :
40mm*20mm~300mm*300mm
Thickness
3.0mm – 120mm
Length
3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Types
Structural Steel U, C, Miscellaneous Channels, Hot Rolled Channels
Stainless Steel Round Bars
Grades :
304, 304L, 304H, 308, (308)/F45, 309, 309S, 310S, 310H, 312, 314, 316, 316L 316H, 316Ti, 317L, 321, 347, 347H,904L
Standard :
ASTM A276, A473, A479, A484, A582
Size Range :
(Ro)Dia 4 - 600mm, (Hex) 6-75mm, (SQ) 4 -100mm
Thickness
5 mm To 500 mm thick in 100 mm TO 6000 mm.
Types
Round, Square, Recatangle, Hexagonal, Round Threaded
Stainless Steel T Beams
Grades :
304, 304L, 304H, 308, 309, 309S, 310S, 310H, 312, 314, 316, 316L 316H, 316Ti, 317L, 321, 347, 347H,904L
Standard :
ASTM A276, A473, A479, A484, A582
Size Range :
3″ thru 12.31″
Thickness
3.0mm – 120mm
Length
3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Types
Structural Steel U, C, Miscellaneous T Beams, Hot Rolled T Beams